HomeMy WebLinkAboutORDINANCE - 1965 - 5/10/1988 - ZONING ORDINANCE AMENDEDNO. 1965
AN ORDINANCE AMENDING THE ZONING ORDINANCE OF THE
VILLAGE BY ADDING WAREHOUSING, PACKAGING AND LIGHT ASSEMBLY
AS A SPECIAL USE IN THE O & T OFFICE/TRANSITIONAL DISTRICT
WHEREAS, the Plan Commission of the Village of Elk Grove
Village at a public hearing duly called and held according to
law considered the question of amending the Zoning Ordinance
of the Village by adding warehousing, packaging and light assembly
as a Special Use in the 0 & T Office/Transitional District;
and
WHEREAS, the President and Board of Trustees of the Village
of Elk Grove Village after having reviewed the findings and
recommendation of said Plan Commission find and believe it to
be in the best interest of the Village that the Zoning Ordinance
be amended to provide for said Special Use.
NOW, THEREFORE, BE IT ORDAINED by the President and Board
of Trustees of the Village of Elk Grove Village, Counties of
Cook and DuPage, Illinois as follows:
Section 1: That Section 5.72 E. of the Zoning Ordinance
of the Village, which Section sets forth Special Uses in the
0 & T Office/Transitional District, be and the same is hereby
amended by adding thereto a new category entitled: Warehousing,
Packaging and Light Assembly, the text of which is set forth
in Exhibit A attached hereto and incorporated herein.
Section 2: That the Village Clerk is hereby authorized
to publish this Ordinance in pamphlet form.
Section 3: That this Ordinance shall be in full force
and effect from and
after its
passage, approval and
publication
according to law.
VOTES: AYES:
5
NAYS: 0 ABSENT:
1
APPROVED:
Charles S. Zettek
VILLAGE PRESIDENT
ATTEST:
Patricia S. Smith
VILLAGE CLERK
PASSED this
loth day
of May
, 1988.
APPROVED this
10th day
of May
, 1988.
PUBLISHED this
1th day
of May
, 1988,
im pamphlet form.
6529 8401
Rev. 5/04/88
5.7 O & T OFFICE/TRANSITIONAL DISTRICT
5.72 E .
Warehousing, Packaging and Light Assembly
Where property is located adjacent to property zoned as an
I-1 or I-2 Industrial District, is also adjacent to property
zoned as an A-1, A-2 and A-3 Residential District, and is not
adjacent to property zoned as R-1, R-2, R-3 or R-4 Residential
District (except where separated by a street or right-of-way of
not less than sixty feet), the following uses shall be Special
Uses:
Warehousing and distribution of goods, products and
supplies;
2. Packaging of existing goods, products and supplies; and
3. Light assembly uses which are designed for a narrow
range of assembly uses which can conform to a high
level of performance standards. Light assembly
establishments of this type can locate in close
proximity to residential uses without creating a
nuisance to surrounding properties. Light assembly
shall consist of the assembly by hand or hand held
tools or an equivalent process of parts which have
already been fabricated prior to such assembly. Light
assembly firms are allowed within this District
provided that the assembly operation is conducted
solely within a building or group of buildings and
will not cause or result in: (a) a violation of the
performance standards set forth in Article 5, Section
5.9 of this Zoning Ordinance for the I-1 and I-2
Industrial Districts; (b) any uses which are
prohibited uses in the I-1 or I-2 Industrial District,
as specified in Article 5, Section 5.86 of the Zoning
Ordinance; (c) hazard of fire or explosion or other
physical hazard to any person, building or vegetation;
(d) radiation or interference with radio or television
reception beyond the boundaries of the immediate site
of the building in which such use is conducted; (e)
scientific testing of instruments which requires the
flying of aircraft in the vicinity in such manner as
to constitute a public nuisance; (f) a harmful
discharge of waste materials (as defined in the
Illinois Environmental Protection Act, 111-1/2
Illinois Rev. Stats, Sec. 1003.53); or (g) unusual
traffic hazards or congestion.
The following conditions and procedures shall be required
as a minimum for such Special Use to be granted:
1. The use proposed must be of the type and so located as
to constitute no significant detrimental influence upon the
surrounding properties.
2. The application for the Special Use shall be
accompanied by a general site plan designating the areas where
buildings, driveways, parking areas and loading docks are to be
located. Such site plan may be modified for all or any part
thereof, prior to the time a building permit is issued so long
as any modification does not substantially change the intent
and effect of the site plan submitted with the application.
3. Wherever property abuts property zoned for residential
purposes, it shall be screened or landscaped in a manner
approved by the Plan Commission, in addition to any other
screening or landscaping requirements which may be specified
elsewhere in the Zoning Ordinance.
4. No storage shall be permitted outside buildings.
The granting of the Special Use as to specific property may
provide that any or all of the Bulk and Yard Requirements and
Regulations for the property be modified to conform in whole or
in part to the requirements for the I-1 or I-2 District which
is adjacent to the property, in lieu of such requirements for
the O & T District, and further may provide that the parking
requirements for the buildings to be constructed thereon
conform to the parking requirements which are set forth in this
Zoning Ordinance for the actual uses made of such buildings as
are set forth in Subsection 3.96.B.C. or D. of the Zoning
Ordinance.