HomeMy WebLinkAboutORDINANCE - 633 - 7/8/1969 - DRIVEWAY SPECIFICATIONSORDINANCE N0. 633
AN ORDINANCE AMENDING SECTION 11.204 OF THE MUNICIPAL CC -DE OF ELK GROriE
VILLAGE Pi.OVIDING FOR DRIVE'v1M SPECIFICATIONS
NOW, THEREFORE, BE IT ORDAINED by the President and Board of
Trustees of the Village of Elk Grove Village, Cook County, Illinois:
Section 1. That Section 11.204 of the Municipal Code of Elk
Grove Village, be and is hereby amended to read as follows:
11.204 Specifications,) Driveways across sidewalks shall be
constructed in compliance with the following:
A. Driveways for Residential Property:
1. Driveways for residential property shall be constructed of
either Portland Cement Concrete or a two (2") inch asphalt
surface.
2. Aprons (that area between the property line and curbing)
shall be constructed of Portland Cem.nt Concrete.
3. Construction of Portland Ccinent Concrete shall have a
thickness of not less than five (5") inches of concrete
and contain a 4110 mesh wire.
4. Construction of asphalt shall have a two (2") inch thick
surface and tho thickness of the gravel or crushed stone
base shall be seven (7") inches.
5. Maximum width of the driveway at the property line shall
be twenty (201) feet.
6. Maximum width of the driveway at the curb shall be twenty-
six (26') feet.
7. All aprons shall have a two (21) foot flare at the curb on
each side of the driveway extending from the property line.
B. Driveways for Industrial and Comincrcial Areas:
1. Driveways shall be constructed of either Portland Cement
Concrete or an asphalt surface.
2. Aprons (that area between the property line and curbing)
shall be constructed of Portland Cement Concrete.
a. All aprons shall be eight (8") inches thick and the
thickness of the gravel or crushed stone base shall
be eight (8") inches and tapped down.
b. The concrete shall be of a six (6) bag mixture.
c. The apron shall contain #6 mesh wire.
d. Aprons shall be poured in eight (811) inch forms from
the property line to the curb.
e. All aprons shall have a minimum five (5') foot flare
at the curb on each side of the driveway extending
from the property line.
f. The apron flare shall not extend over the side property
line.
3. Maximum width of driveway to other than loading dock areas
shall be thirty-five (359 feet at the property line and
shall be forty-five (451) feet at the curb line.
4. The minimum width of driveway to a single loading dock
shall be fourteen (14') feet at the property line with an
apron constructed as above.
5. The width of driveway to a multiple loading dock area
shall be the width of each loading dock plus one (11) foot
on each side, with a maximum of sixty-two (629 feet and
an apron constructed as above.
6. All manholes existing in driveways shall be formed box -
shape with 3/4 inch expansion joints.
7. All Village water valves that exist in path of driveways
shall be encased in a concrete vault.
8. Driveways shall not be constructed within thirty (30')
feet of any intersection.
9. Driveways shall not be constructed within ten (101) feet
of a fire hydrant.
&Z
C. Specifications for Curb - Industrial and Commercial Areas:
1. New installation of aprons require the removal of old
curb and gutters.
2. Old curb and gutters to be saw -cut and removed.
3. New depressed curb and gutters shall be installed per
Village of Elk Grove Village specifications.
4. All new curb and gutters shall be constructed of a six (6)
bag mixture of Portland Cement Concrete, shall have 3/4
inch reinforcing bars and a 3/4 inch expansion joint at
each cut in the curb.
5. Where storm sewer is in curb, the inlet shall consist of a
Neemah 03205 or equal.
Section 2. That this ordinance shall be in full force and
effect upon its passage, approval and publication according to law.
PASSED
this
8th
day
of
July
, 1969.
APPROVED
this
8th
day
of
July ,
, 1969.
ATTEST:
Village Clerk
PL13LISHED THIS 15th day of Jud , 1969.